Screen Flex Cable for Acer Aspire 7 A715-51G A715-76G - 50.QGCN7.006 DD0ZYXLC001 30 pins
€28.99
Tax included
The 50.QGCN7.006 screen flex cable is a replacement part for Acer Aspire 7 A715-51G and A715-76G laptops with a 30-pin eDP connector for 60Hz non-touch screens. Compatible with part number DD0ZYXLC001 and over 10 models in the series. New, with a 3-year warranty and shipping from Spain in 24-48 hours.
50.QGCN7.006
Screen Flex Cable for Acer Aspire 7 A715-51G A715-76G - 50.QGCN7.006 DD0ZYXLC001 30 pins
New, for 15.6" 60Hz Non-Touch screens with 30-pin eDP connector.
- 30-pin eDP Connector
- For 60Hz Non-Touch Screens
- New
Key features
-
Screen Connection
30-pin eDP connector, 0.5mm pitch, specifically designed for 60Hz panels.
-
Specific Compatibility
Exclusive for models with Non-Touch screens. Not compatible with touch versions.
-
Supported Models
Designed for the Acer Aspire 7 A715-51G and A715-76G laptop series.
-
Secure Installation
Verify that the photo and part number match your original cable to avoid damage to the motherboard.
Product description
This LCD video flex cable, with part number 50.QGCN7.006, is the specific replacement for Acer Aspire 7 series laptops, including models A715-51G and A715-76G. It is designed to connect the motherboard with the device's screen, transmitting the video signal.
It is crucial to verify the specifications before purchase. This cable features a 30-pin eDP connector and is exclusively intended for non-touch (Non-Touch) screens with a 60Hz refresh rate. Using an incorrect cable can cause irreparable damage to the laptop's motherboard.
To ensure compatibility, visually compare your original cable with the product photos and make sure that the part numbers, such as 50.QGCN7.006 or DD0ZYXLC001, match. It is recommended that installation be performed by qualified technical personnel.
Important note: Due to the nature of the component, this product is not eligible for return if its packaging seal has been removed.
The integrated camera connector on this flex cable has 8 pins. Before placing an order, it is essential to confirm that both the screen connector (30 pins) and the camera connector match those of your original cable. For any questions, contact our technical support for advice.
Who is this product for?
For technical services and private users who need to replace a damaged video cable in an Acer Aspire 7 laptop, solving image problems such as flickering, lines, or a black screen.
Ideal for
- Repair of an Acer Aspire 7 A715-51G with a screen that shows no image.
- Replacement of a 50.QGCN7.006 flex cable damaged during disassembly.
- Solution for flickering or artifacts on the screen caused by a faulty cable.
- Flex cable replacement in Acer Aspire 7 A715-76G laptops.
Technical specifications
| Conector de Pantalla | eDP 30 pins |
|---|---|
| Paso del Pin | 0.5mm |
| Conector de Cámara | 8 pins |
| Marca | Acer |
|---|---|
| Series | Aspire 7 A715-51G, A715-76, A715-76G |
| Tipo de Pantalla | LED 15.6" 60Hz Non-Touch |
| Part Number Principal | 50.QGCN7.006 |
|---|---|
| Part Number Alternativo | DD0ZYXLC001 |
Compatibility
Compatible part numbers
- 50.QGCN7.006
- DD0ZYXLC001
Compatible laptop models
- Acer Aspire 7 A715-51G
- Acer Aspire 7 A715-76
- Acer Aspire 7 A715-76G
- Acer Aspire 7 A715-51G-55PY
- Acer Aspire 7 A715-51G-730Q
- Acer Aspire 7 A715-51G-71XY
- Acer Aspire 7 A715-51G-7021
- Acer Aspire 7 A715-51G-74DB
- Acer Aspire 7 A715-51G-71PE
- Acer Aspire 7 A715-51G-77YG
- Acer Aspire 7 A715-51G-78HA
- Acer Aspire 7 A715-76-765N
- Acer Aspire 7 A715-76G-53XU
- Acer Aspire 7 A715-76G-57ZE
Always check the part number printed on your original part before ordering; if in doubt, contact us with the exact model of your device.
Frequently asked questions
Is this cable compatible with my Acer Aspire 7 A715-51G-55PY?
Yes, this flex cable is compatible with the Acer Aspire 7 A715-51G-55PY model. However, it is crucial to verify that your original screen is non-touch and 60Hz, as this cable will not work with touch screens or other frequencies. Always compare the part number 50.QGCN7.006 with your original cable's part number.
Is this cable suitable for a touch screen?
No. This flex cable is designed exclusively for non-touch screens. The pinout and connector structure are different from those of touch versions. Installing it on a device with a touch screen will not work and could damage the motherboard or the screen itself.
What should I check before installing the cable?
Before installation, it is essential to disconnect the laptop battery to avoid short circuits. Verify that the number of pins (30), the connector type (eDP), and the part number (50.QGCN7.006 or DD0ZYXLC001) exactly match your old cable. Incorrect installation can cause permanent damage.
What warranty does it have and can I return it if I make a mistake?
The product has a 3-year warranty for private customers (1 year for professionals). You have 14 days to return it, but please note that due to the nature of this component, returns will not be accepted if the packaging seal has been opened. Return shipping is at your expense or with our collection service for 8.90€ in Spain and Portugal.
How long does shipping to Barcelona take?
We ship from our warehouse in Spain. For destinations in the peninsula like Barcelona, the delivery time is 24 to 48 working hours. Orders placed before 16:00h are prepared on the same day.
Warranty, returns and shipping
- Warranty: 3-year warranty (1 year for business customers)
- Returns: 14-day returns (ship it yourself or €8.90 home pickup in Spain and Portugal)
- Shipping: EU delivery 48-120 h
- Condition: New
FLEX-1906
Data sheet
- Compatibility
- Screen Pin
- Camera Pin
- Flex Type
- Non Touch
- Connector Type
- CG. Reference
- 50.QGCN7.006
- CG. Type of piece
- Screen Flex Cable
- CG. State
- New
- CG. Warranty
- 3 years
New
☆☆☆☆☆
No reviews yet for this product. After your purchase you will receive an email to leave yours.
Know our store?
Review us on Google
-
Frequently purchased together
-
Featured Products
LCD video flex cable for Acer Aspire 7 A715-51G and A715-76G laptops. Reference 50.QGCN7.006 / DD0ZYXLC001. Designed for 15.6" non-touch screens with a 30-pin eDP connector and 60Hz. New product with a 3-year warranty.
0