The 50.Q83N2.008 screen flex cable is a replacement part for Acer Nitro AN517-41 and AN517-52 laptops, with a 40-pin eDP connector for 120/144Hz non-touch screens. Compatible with over 100 models and part numbers DC02C00PZ00 and FH71M_EDP_CABLE. New, with 3 years warranty and 24-48 h shipping.
50.Q83N2.008
Screen Flex Cable for Acer Nitro AN517-41 AN517-52 50.Q83N2.008 DC02C00PZ00 - 40 pins 120/144Hz
LCD/LED video cable for 17.3 inch, 120/144Hz non-touch screens. New, with 3 years warranty.
Designed for Acer Nitro AN517-41, AN517-52, AN517-53, AN517-54 and compatible series.
40-pin eDP connector for 17.3 inch screens.
Supports 120Hz and 144Hz panels, ideal for gaming.
Exclusive for non-touch screens (Non-Touch).
The LCD/LED video flex cable, with part number 50.Q83N2.008, is an essential replacement component for connecting the screen in 17.3-inch Acer Nitro laptops. This cable is specifically designed for models equipped with high refresh rate (120Hz / 144Hz) and non-touch screens. It features a 40-pin eDP screen connector and a 6-pin camera connector.
It is the perfect solution to repair image problems caused by a damaged cable, such as flickering, lines on the screen, or a complete absence of video. Its compatibility covers a wide range of models from the Acer Nitro AN517-41, AN517-52, AN517-53, and AN517-54 series. New product, ready to be installed by technical services or advanced users.
Attention: Verify that the part number and photograph match your original cable. This cable is 40-pin with a 0.5mm pitch and is not compatible with touch versions. Incorrect installation can damage the motherboard.
Due to the delicate nature of this component, returns of the flex cable will not be accepted if its packaging seal has been removed or tampered with. Ensure compatibility before opening the product.
For technical services and private users who need to replace a damaged video cable in Acer Nitro laptops to solve image problems.
| Screen Connector | 40 pins eDP |
|---|---|
| Camera Connector | 6 pins |
| Pin Pitch | 0.5 mm |
| Brand | Acer |
|---|---|
| Series | Nitro AN517-41, AN517-52, AN517-53, AN517-54 |
| Screen Type | 17.3" LED Non-Touch |
| Refresh Rate | 120Hz / 144Hz |
| Condition | New |
|---|---|
| Main Part Number | 50.Q83N2.008 |
Always check the part number printed on your original part before ordering; if in doubt, contact us with the exact model of your device.
Yes, this flex cable with part number 50.Q83N2.008 is fully compatible with the Acer Nitro 5 AN517-54-742R model, as it is included in the list of supported models. Make sure your screen is non-touch and 120/144Hz to ensure correct operation.
Yes, part numbers 50.Q83N2.008 and DC02C00PZ00 are equivalent for this flex cable model. You can use it as a direct replacement as long as the 40-pin, non-touch type, and refresh rate specifications match those of your equipment.
The product has a 3-year warranty for private customers (1 year for professionals). You can exercise your right of withdrawal within 14 days. However, due to its fragility, returns of this cable are not accepted if its seal has been opened. Verify compatibility before unsealing it.
We ship from Spain. For orders to Madrid and the rest of the peninsula, the delivery time is 24 to 48 business hours. Orders placed before 16:00 are prepared on the same day.
The replacement requires an intermediate technical level. You will need a set of precision screwdrivers and plastic tools (spudgers) to open the laptop casing and screen bezel without damaging them. It is crucial to disconnect the battery before handling any internal components to avoid short circuits.
Data sheet
No reviews yet for this product. After your purchase you will receive an email to leave yours.