- Out-of-Stock
The B173HAN05.4 screen is a 17.3" FHD (1920x1080 px) 360Hz LCD panel with a 40-pin eDP connector for gaming laptops. Compatible with part numbers such as B173HAN05.2 and NE173FHM-NZ6. Brand new, with a 3-year warranty and shipping from Spain in 24-48 h.
B173HAN05.4
B173HAN05.4 Screen 17.3" FHD 1920x1080 360Hz Slim Matte 40 Pins
17.3" Full HD 360Hz eDP 40 pins slim LCD panel without brackets
360Hz frequency for maximum fluidity in gaming and competitive environments.
Native 1920x1080 px resolution in a 17.3-inch widescreen format.
Wide viewing angles with 72% NTSC color coverage (100% sRGB) and 300 cd/m² brightness.
40-pin interface located on the bottom right with a 0.4mm pin pitch.
The B173HAN05.4 screen is a 17.3-inch replacement LCD panel with Full HD resolution (1920x1080 px) and a 360Hz refresh rate, designed to replace damaged or defective panels in high-performance laptops. This panel features IPS/AHVA optical technology offering 72% NTSC color reproduction (equivalent to 100% sRGB) and a brightness level of 300 cd/m².
It features a 40-pin eDP 1.4a connection located at the bottom right rear with a connector length of 2 cm and a pin pitch of 0.4 mm. This is a slim model without integrated metal mounting brackets, with dimensions of 39 cm wide by 22.5 cm high, and a bottom controller board of 28.7 cm by 1 cm. The exterior finish is matte, reducing reflections under any lighting condition.
To ensure exact compatibility during technical replacement, it is essential to disassemble the broken screen and verify that the part number on the rear label, the connector position and pins, and the physical measurements match this model.
New non-touch replacement panel. Its 360Hz refresh rate requires the laptop to have a video cable and graphics card compatible with the 40-pin eDP 1.4a standard.
Repair technicians and users who need to replace a damaged 17.3" screen with a high refresh rate in gaming laptops.
| Size | 17.3" |
|---|---|
| Resolution | 1920x1080 px FHD |
| Refresh rate | 360 Hz |
| Panel type | IPS / AHVA |
| Backlighting | LED |
| Finish | Matte |
| Brightness | 300 cd/m² |
| Color gamut | 72% NTSC |
| Touch function | No |
| Connector type | eDP 1.4a |
|---|---|
| Number of pins | 40 pins |
| Pin pitch | 0.4 mm |
| Position | Bottom right |
| Connector length | 2 cm |
| Total dimensions | 39 cm x 22.5 cm |
|---|---|
| Board dimensions | 28.7 cm x 1 cm |
| Mounting brackets | Without brackets |
Always check the part number printed on your original part before ordering; if in doubt, contact us with the exact model of your device.
Compatibility is confirmed by removing the laptop bezel and checking the part number printed on the rear sticker of the faulty panel. It must match B173HAN05.4, NE173FHM-NZ6, or B173HAN05.2, and you must also verify that the connector has 40 pins in the lower right corner and that the dimensions are 39x22.5 cm without brackets.
It features a 40-pin eDP 1.4a connector with a 0.4 mm pitch located at the bottom right (looking at the panel from behind). It does not have tabs or perforated metal supports (without brackets), so it is secured to the chassis using specific adhesive strips.
The B173HAN05.2 (300Hz) and NE173FHM-NZ6 panels share the 40-pin eDP connector, form factor, and resolution with the B173HAN05.4 (360Hz). However, to ensure it operates at the specified frequency, the original flex cable and GPU must support the corresponding eDP 1.4a standard.
A plastic opening pick is required to remove the bezel without damaging it, along with precision tweezers. It is essential to disconnect the internal battery and charger before handling the 40-pin flex cable to prevent short circuits on the motherboard.
It comes with a 3-year warranty (1 year for professionals). You have 14 days to return it (shipping at your expense or home pickup for €8.90 in Spain and Portugal).
Shipping is made from Spain with delivery in 24-48 h for destinations in mainland Spain and Portugal for orders placed on business days before the cut-off time.
Equivalent screen guaranteed
The same laptop screen is made by several panel manufacturers. You may therefore receive a unit from AU Optronics, BOE, Innolux (ChiMei), LG Display, Samsung or another recognised manufacturer, with a label reference different from your original screen or from the photo. It will always be equivalent and compatible with the part numbers listed on this page:
Receiving a different manufacturer or an equivalent reference is not considered a shipping error. If in doubt before buying, contact us with the reference of your original screen.
Data sheet
No reviews yet for this product. After your purchase you will receive an email to leave yours.